Carbon Fibre Tripod

CP26 Travel Tripod Centerpod CP26-S FLM-32-26-907 REDUCED

CP26 Travel Tripod Centerpod CP26-S FLM-32-26-907 REDUCED

CP26 Travel Tripod Centerpod CP26-S FLM-32-26-907 REDUCED    CP26 Travel Tripod Centerpod CP26-S FLM-32-26-907 REDUCED

The CP26 Travel (CP26-S5S) FLM CentrePod Tripod is a small, lightweight yet extremely stable tripod with each leg comprising of 5 pure carbon fibre tube segments for smaller packing size. The CP26 range is especially suited when you're on the move due to it's compactness.

The minimum height of the CP26-S4S is 11cm, the maximum height when fully extended is 1400mm, while the maximum height without the centre column extended is 1190mm. The weight is 1.3kg and load capacity is 12kg.

The uppermost leg tube is 26.5mm in diameter and the length when closed (for storage) is 380mm. You can store the FLM tripods WITH the FLM Centreball Head connected, as it fits elegantly and perfectly between the tripod legs, without changing the overall stored dimensions. All FLM Centerpod tripods include an adapter thread with 1/4 inch one end and 3/8 inch the other. This FLM tripod is made from 10-layer carbon tubes made of pure carbon fibres to ensure stability and lightness of the product. It is important to bear in mind that the more tube sections you have allow for more compactness, which is ideal when you need to travel light.

While the fewer sections you have provide more stability, which is beneficial for shooting in low light. Each FLM tripod is fitted with an anti-rotation centre column (middle tube) that can be displaced over its entire length. Its design means that, even with the tripod head attached, its length when stored is not exceeded. The FLM Centerpod Tripod can be used without its center column in order to obtain the best possible degree of stability and freedom from vibration and to achieve a low ground level. A retractable hook system is integrated into each center column in order to add stabilisation to the FLM tripod outdoors.

The special locking technology enables each tube segment to be opened and locked into place using just one hand. FLM's automatic leg locking system means the actions of unfolding and folding up the FLM Centerpod legs are accomplished with just a few movements. To set up the tripod, each leg is rotated downwards to the desired locking position.

Each position will lock automatically on the way down, but you can also manually change this. To fold up the tripod, make sure the legs are all swiveled downwards first (through each locking position). Then fold each leg in one movement upwards, through 180° with one movement for each leg, so they all meet together around the centre column. When the legs are folded together in this way, the stored dimensions of the FLM-Centerpod are very compact. This CP26 model has 5 tubes each with a protective removable screw rubber foot / cap, which when removed reveals a carbon fibre spike with a steel tip. While the CP26 3 tube models and CP30 models come with a protective retractable rubber foot, which when turned counter clockwise reveals the carbon fibre spike with steel tip. You will need one of the following spirit bubble levels that have been designed to fit in the hotshoe adaptor of your SLR or DSLR camera. Spirit Bubble Level (FLM-12-01-901) OR.

2 Axis Spirit Level (FLM-12-02-901) OR. 3 Axis Spirit Level (FLM-12-03-901).

The benefit of having the spirit bubble level at this point is for ease of levelling your equipment and reading the level. Height excluding centre column (mm): 1190. Uppermost tube diameter (mm): 26.5. Foot system: Carbon fibre spike with steel tip & protective removable rubber screw foot / cap.

RECOMMENDED FLM TRIPOD HEADS TO USE WITH THIS TRIPOD. This item is in the category "Cameras & Photography\Tripods & Supports\Tripods & Monopods".

The seller is "snapperstuff-uk" and is located in this country: GB. This item can be shipped to United Kingdom.

  • Maximum Load: see description
  • Maximum Height: see description
  • Model: CP26 Travel Tripod - Centerpod - CP26-S - FLM-32-2
  • To Fit: Camera
  • Country/Region of Manufacture: Germany
  • Material: Carbon Fibre
  • Unit Quantity: 1
  • Type: Tripod
  • Features: see description
  • Unit Type: kg
  • Brand: FLM
  • Manufacturer Warranty: None
  • Head Type: see description


CP26 Travel Tripod Centerpod CP26-S FLM-32-26-907 REDUCED    CP26 Travel Tripod Centerpod CP26-S FLM-32-26-907 REDUCED