Reach for the top with the LM-324CL Summit Series Extra Long Version Carbon Fiber Tripod from Leofoto. The 4-section support has 10x carbon fiber tubes that make the tripod a lightweight 4 lb support, with a. Strong load capacity of 55.1 lb. The 6061 aluminum parts are CNC machined and are hard anodized, making.
The surface tough against scratching or scuffing. The twist leg lock system is easily opened with a simple. Quarter turn, which enables you to extend the all the leg's sections to a maximum height of 79.5.
With the tripod's three variable leg angles of 23, 55, and 85°, it allows you to splay the legs completely out. So the support can drop to a minimum height of 4. At the tripod's apex, the spider has been hollowed out.Which adds to the relevance of the tripod's light weight. Additionally, the mounting platform is removable. Socket is made available on the side of the spider for photo or video accessories.
To store or travel with the. Tripod, it folds to a length of 26.7. Leofoto LB-75S Quick Adjust Horizontal Head, Leveling Base for Tripod. Model: LB-75S Diameter: 75 mm / 2.95 in Height: 81 mm / 3.19 in Level adjustment: ±15° Mounting stud:UNC3/8" Mounting hole:UNC3/8" Max load:25 kg / 55.1 lb Weight:346g / 0.76 lb.
A leveling base on your tripod is the perfect foundation for gimbal heads, fluid heads and even ballheads. Each leveling base offers +/-15° of leveling capability and locks solidly with just a twist. Choose a leveling base with a flat platform for direct mounting of a tripod head. CNC machined 6061-T6 Aluminum ANTI-TWIST SAFETY SCREWS DESIGN Included 3 set-screws on the spider to secure the ballhead mounted on the tripod(turn the set-screws upwards with the included allen wrech to secure the ballhead on top). BETTER LOCK-UP Screw the leveling base onto the platform of your tripod, or any mounting platform onto which you want to mount a leveling base to.Twist the handle to lock & unlock the base. The fluid motion allows smooth and fast leveling, no matter the load. Additionally, this locking ring gives the user greater leverage for better lock-up.
UNC3/ 8-16 MOUNTING STUD This Leveling Base is designed to be compatible with all tripods. It has a 3/ 8"-16 socket on the bottom, allowing it to be screwed on to any mounting platform with a stud of the same size and thread call-out (3/8"-16). RESERVED HOLE FOR ALLEN KEY Use included allen key to strengthen the locking when the heay-liting needed. This item is in the category "Cameras & Photography\Tripods & Supports\Tripods & Monopods". The seller is "one-support" and is located in this country: CN.
This item can be shipped worldwide.